global: meta: # -- Sets the nscale version of this deployment / instance. This is used by the operator to display # the correct version e.g. in the Web UI. # @internal -- this is set by the devOps pipeline, so do not modify nscaleVersion: "9.2.1402" waitImage: # -- defines the nplus toolbox tag to be used for the *wait* feature # @internal -- set by devOps pipeline, so do not modify tag: 1.2.1300 logForwarderImage: # -- defines the tag for the logforwarder (FluentBit) # @internal -- set by devOps pipeline, so do not modify tag: "2.0" application: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1402" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1402.46530 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: application-layer # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale prepper: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "1.2.1300" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: 1.2.1300 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: toolbox2 # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: git.42i.org/nplus nappl: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1402" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1402.46530 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: application-layer # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale nappljobs: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1402" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1402.46530 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: application-layer # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale web: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024072410 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: application-layer-web # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale mon: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1200" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1200.2024052410 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: monitoring-console # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale rs: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1401" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1401.2024072408 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: rendition-server # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale nstl: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024072411 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: storage-layer # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale nstla: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024072411 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: storage-layer # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale nstlb: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024072411 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: storage-layer # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale nstlc: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024072411 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: storage-layer # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale nstld: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024072411 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: storage-layer # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale pipeliner: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1402" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1402.2024073109 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: pipeliner # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale cmis: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1200" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1200.2024060311 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: cmis-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale ilm: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1100" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1100.2024042917 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: ilm-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale erpproxy: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.3.1000" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.3.1000.2024092409 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sap-proxy-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/pre-release/nscale erpproxya: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.3.1000" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.3.1000.2024092409 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sap-proxy-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/pre-release/nscale erpproxyb: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.3.1000" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.3.1000.2024092409 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sap-proxy-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/pre-release/nscale erpproxyc: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.3.1000" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.3.1000.2024092409 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sap-proxy-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/pre-release/nscale erpproxyd: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.3.1000" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.3.1000.2024092409 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sap-proxy-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/pre-release/nscale erpcmis: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "10.0.1000" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.3.1001.2024092920 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: erp-cmis-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale webdav: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1000" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1000.2024032702 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: webdav-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale administrator: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: administrator # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale pam: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1300" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1300.42214 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: process-automation-modeler # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale # -- For the Database, we use a postgres 16 # Ceyoniq uses docker.io/bitnamilegacy/postgresql:16 database: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "16" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: "16" # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: bitnamilegacy/postgresql # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: # -- For SharePoint Connector, there is no entry in Github yet, so we set it hardcoded # TODO: 9.3: Test again later, if there is a valid github entry. sharepoint: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024073012 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sharepoint-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale sharepointa: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024073012 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sharepoint-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale sharepointb: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024073012 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sharepoint-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale sharepointc: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024073012 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sharepoint-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale sharepointd: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "9.2.1400" image: # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: ubi.9.2.1400.2024073012 # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: sharepoint-connector # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: ceyoniq.azurecr.io/release/nscale # -- rms is not a Ceyoniq component, but a part of nplus rms: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "1.2.1200" image: # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: admin-server # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: 1.2.1200 # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: git.42i.org/nplus rmsa: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "1.2.1200" image: # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: admin-server # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: 1.2.1200 # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: git.42i.org/nplus rmsb: meta: # -- This is the version of the component, used for display # @internal -- set by devOps pipeline, so do not modify componentVersion: "1.2.1200" image: # -- sets the name of the image to use for this component # @internal -- set by devOps pipeline, so do not modify name: admin-server # -- defines the tag for this component # @internal -- set by devOps pipeline, so do not modify tag: 1.2.1200 # -- sets the repo from where to load the image. This can be overridden on environment or instance level # in case you have your own repo for caching and security reasons repo: git.42i.org/nplus